new kingsland multi steelworkers excellent offers from Rondean Machinery

The Kingsland Multi range of 60 up to 175 ton machines are in the Kingsland tradition of well engineered, robust steelworkers, built for a long working life.
These universal machines are supplied with standard tooling including repetition support tables at punch, shear and notch stations and with easily adjusted hold-downs at all five work stations to safely control the operations. Comprehensive safety guards are fitted as standard on all work stations.
Free standing on a suitable floor, they just require electrical connection to be ready for work. For two operator utilisation, the hydraulic system is activated by two shielded foot controls, one operating the punch end cylinder, the other operating the shear end cylinder. The shear cylinder provides the power to the three shearing and the notch stations.
The system gives accurate power inching at all five work stations and allows the machine to e stopped at any position giving safe and accurate tool setting and work positioning. Limit switches at both ends of the machine control stroke length at all stations.
Centralised lubrication is metered by one-shot system, being only one feature of the low maintenance requirement.
An optional ‘Production Pack' is available to enhance the machine specification, this includes: 1 low volt halogen lamp on a movable magnetic base, 1.0m long touch and cut ruled length stop, fine adjustment facility to the punch stroke and measuring scales in the notch table.

PUNCHING	Multi 80	Multi 95	SECTION CUTTING	Multi 80	Multi 95
Max Cap	28 x 20 mm	27 x 25 mm	Round / Square	45 mm	50 mm
Dia x Thickness	57 x 10 mm	57 x 12 mm	Channel / Beam (optional)	130 / 65 mm	160 / 90 mm
Stroke Length	55 mm	80 mm	Tee (optional)	90 x 12 mm	100 x 12 mm
Standard Throat Depth	305 mm	355 mm	SHEARING
Largest Hole (standard)	57 mm	57 mm	Flat Bar Max thickness	300 x 20 mm	380 x 20 mm
Largest Hole (optional)	160 mm	160 mm	Flat Bar Max width	450 x 15 mm	480 x 15 mm
NOTCHING			Angle flange Trim max 45 degrees	100 x 15 mm	120 x 15 mm
Material thickness	12 mm	13 mm	ANGLE BAR CUTTING
Width - rectangle	40 mm	52 mm	90 degrees	150 x 13 mm	150 x 15 mm
Depth - rectangle	90 mm	100 mm	45 degrees	70 x 10 mm	80 x 10 mm
depth - vee (optional)	60 mm	70 mm	Motor Power	7.5 kW	7.5 kW
			Nett Weight	1925 kg	2400 kg

Standard:

Large punch table with multi-purpose bolster – removable table block for overhang channel /joist flange punching.
Punch table, shear table an notch table standard equipment
Non-tiltable and as thus wear-free-angle-cutting blades
Power inching and adjustable strokes at punch & shear end
Centralised pressure lubrication
Wide variety of applications – for large hole punching, crimping, tube notching, bar bending, sheet bending, punch press applications …
Large throat depth at the punching station –extra deep throat models available
Mitre cut flanges of angle under shear blade
Alternative rectangular / vee notching facility
Work station guards standard fitment
Two cylinder operation
Overload relief on hydraulic system
Interchangeable bearings, seals and valves readily available from stockists of hydraulic equipment.
Machines with very low maintenance

Punch adaptors
Swing away punch stripper unit
Easy change punch holder
Universal die bolster
Heavy-duty support tables with guides at shear station and notch station
Heavy-duty punch table with guides and backstop
Curved shear arm blade with 2 (optional:4) cutting edges
Shear body blade with 4 cutting edges
Section arm & body blade with 1 cutting edge
Angle cutting arm & body blades with 4 cutting edges
Rectangular notch bolster blades with 4 cuttings edges
Service toolkit
Work station guards
Instruction, operating and maintenance manual
Hydraulic oil fill

LARGER MACHINES AVAILABLE :
CONTACT US TO DISCUSS YOUR PRODUCTION NEEDS