Telephone44 (

The ‘Compact range are universal multi-purpose and compact hydraulic steelworkers developed for production purposes with maximum efficiency.

With 5 workstations for punching, cropping round and angle bars, cutting angle iron, shearing flat bar and notching

The punch station is designed to enable multiple punching applications.

The machines are equipped with blades for cropping round and square bars, optional blades are available for cutting U-, I-, T- and many other special profiles. Angle iron can be cut on 90° and/or 45° (through both flanges, internal and external)

All blades have multiple cutting edges and can be reground.

The shear is able to cut thick as well as thin material without the need for blade gap or cutting angle adjustments. Also flanges of angle profiles can be cut.

PUNCHING	compact 45	compact 60	SECTION CUTTING	compact 45	compact 60
Max Cap	22 x 15 mm	28 x 15 mm	Round / Square	30 / 30 mm	40 / 35 mm
Dia x Thickness	38 x 8 mm	38 x 11 mm	Channel / Beam (optional)	80 / 45 mm	102 / 51 mm
Stroke Length	50 mm	55 mm	Tee (optional)	40 x 7 mm	76 x 10 mm
Cycles / Min (16mm travel)	20	26	SHEARING
Throat Depth	175 mm	220 mm	Flat Bar Max thickness	200 x 15 mm	200 x 20 mm
Largest Hole (standard)	38 mm	38 mm	Flat Bar Max width	300 x 12 mm	300 x 15 mm
Largest Hole (optional)	110 mm	110 mm	Angle flange Trim max 45 degrees	80 x 10 mm	80 x 10 mm
NOTCHING			ANGLE BAR CUTTING
Material thickness	8 mm	10 mm	90 degrees	100 x 10 mm	127 x 10 mm
Width - rectangle	35 mm	42 mm	45 degrees	70 x 6 mm	70 x 6 mm
Depth - rectangle	75 mm	100 mm
depth - vee (optional)	60 mm	60 mm	Motor Power	3 kW	4 kW
			Nett Weight	1080 kg	1250 kg

Standard:

Universal bolster for punching flat bar, angle iron and the flange of channel and / or beam.
Punching up to 38 mm in the standard execution
Large hole attachment for punching larger diameters available as optional extra.
Heavy-duty support table on the punch & the shear station and also the notch station – all with the same working height.
Low power inch mode and adjustable stroke on every station
The Unique ‘Z’ – aperture enables to cut angle iron on every angle, varying from 45° up to 90°, both internal and external (both flanges). Cutting flanges from large-sized angle-iron can be mitre cut with the shear. (see capacities)
Rectangular notching applications. The notching station can optionally be transformed into a secondary punching station
Extended safety features as standard equipment
Centralised pressure lubrication
High quality interchangeable bearings, seals and valves with well-known brand names, available from stockists.
Machines with low maintenance requirements
Single-phase execution available
Possibility to use tooling from other brand names with optional adapters