Telephone44 (

The ‘Compact 40’ is the most compact machine with 4 workstations for punching, cropping round and angle bars, cutting angle iron and shearing flat bar

The Compact 45 and 60 have an additional notching station.

The punch station is designed to enable multiple punching applications.

The machines are equipped with blades for cropping round and square bars, optional blades are available for cutting U-, I-, T- and many other special profiles.

All blades have multiple cutting edges and can be reground.

The shear is able to cut thick as well as thin material without the need for blade gap or cutting angle adjustments. Also flanges of angle profiles can be cut.

PUNCHING		SECTION CUTTING
Max Cap	20 x 15 mm	Round / Square	30 / 25 mm
Dia x Thickness	38 x 8 mm	Channel / Beam (optional)	76 / 38 mm
Stroke Length	32 mm	Tee (optional)	38 x 6 mm
Cycles / Min (16mm travel)	23	Notching	optional
Throat Depth	175 mm	SHEARING
Largest Hole (standard)	38 mm	Flat Bar Max thickness	200 x 13 mm
Largest Hole (optional)	57 mm	Flat Bar Max width	350 x 6 mm
ANGLE BAR CUTTING		Angle flange Trim max 45 degrees	80 x 10 mm
90 degrees	80 x 8 mm	Motor Power	3 kW
45 degrees	50 x 6 mm	Nett Weight	550 kg

Standard:

Universal bolster for punching flat bar, angle iron and the flange of channel and / or beam.
Punching up to 38 mm in the standard execution
Large hole attachment for punching larger diameters available as optional extra.
Heavy-duty support table on the punch & the shear station
Low power inch mode and adjustable stroke on every station
Extended safety features as standard equipment
High quality interchangeable bearings, seals and valves with well-known brand names, available from stockists.
Machines with low maintenance requirements
Single-phase execution available as optional extra
Possibility to use tooling from other brand names with optional adapters